Engineered 125mm Ash Floor Natural Oil

Plank Dimensions:12T x 125W x 1200mmL
Grade:Natural
Treatment:N/A
Texture:N/A
Wear Layer:2mm Ash
Joint Profile:Tongue & Groove
Edges Style:Mirco-Beveled
Core:Cross-directional Eucalyptus plywood
Formaldehyde Emission:E0 | F****
ECO(FSC,PEFC) Certification:Available on request
Filler Color:Natural
Status:Pre-finished
Finish Type:Natural Oil
MOQ:400m²

 

Commercial Warranty

  • Structural-Lifetime
  • 25-yr Residential/2-yr Light Commercial when properly maintained per Care & Maintenance Instructions
  • Not approved for use over radiant heat systems due to wide width

5% off for your first order !

  • Check Mark Satisfaction Guaranteed
  • Check Mark Quality Warranty
  • Check Mark Defective Product Refunds
  • Check Mark Free Sample

Ash Characteristics

Ash, scientific name: Fraxinus spp., including Fraxinus excelsior, F. angustifolia, F. chinensis, F. mandshurica and F. americana, is widely distributed in North America, Asia and Europe.

The heartwood is a light to medium brown color, though darker streaks can also be seen. Sapwood can be very wide, and tends to be a beige or light brown; not always clearly or sharply demarcated from heartwood. It has a medium to coarse texture similar to oak. The grain is almost always straight and regular, though sometimes curly or figured boards can be found.

Ash has fairly good strength properties for its weight, and is also shock resistant (0.68 g/cm3 at 12% MC, Janka hardness 6580N). Both the mechanical and grains are similar to white oak. But the ash wood rays are less conspicuous.

 

*Top layer thickness is measured prior to the finishing process. Finishing processes such as brushing may affect the overall thickness.

** Based upon the use of formaldehyde-free glues, our timber floors are in full compliance with F**** formaldehyde emissions regulations.

Contact Form Demo