Engineered 120mm Beliwood Floor UV Lacquer
|Plank Dimensions:||14T x 120W x 900mmL|
|Wear Layer:||3mm Beliwood|
|Joint Profile:||Tongue & Groove|
|Core:||Cross-directional Eucalyptus plywood|
|Formaldehyde Emission:||E0 | F****|
|ECO(FSC,PEFC) Certification:||Available on request|
|Finish Type:||UV Lacquer|
- 25-yr Residential/2-yr Light Commercial when properly maintained per Care & Maintenance Instructions
- Not approved for use over radiant heat systems due to wide width
5% off for your first order !
- Satisfaction Guaranteed
- Quality Warranty
- Defective Product Refunds
- Free Sample
Beli, scientifc name: Julbernardia pellegriniana, is a huge tropical tree that distributed in Cameroon and Gabon, Africa.
The heartwood of Beli is a light brown, commonly with alternating darker stripes throughout. Mineral/gum deposits occasionally present at heartwood. Quartersawn sections in particular exhibit a Zebrawood-like appearance. Wide sapwood is a pale yellow and is clearly demarcated from the heartwood, and lacks the darker stripes. Grain is usually interlocked, with a uniform medium to coarse texture, and moderate natural luster.
As a tropical hardwood, Beli is also hard and dense. The Janka hardness scores 6580N. The specific gravity is 0.77 g/cm3, which is similar to white oak. Beli is usually seen as a more economical substitute for Zebrawood.
*Top layer thickness is measured prior to the finishing process. Finishing processes such as brushing may affect the overall thickness.
** Based upon the use of formaldehyde-free glues, our timber floors are in full compliance with F**** formaldehyde emissions regulations.